Rosin presses are still relatively new tools on the market, but due to superb functionality and even better results, they are more than just an important tool to have. Basically, they use a combination of heat and pressure to extract rosin. But, these tools are by far more complicated than it sounds, so you will definitely need the best rosin press.
As we have just mentioned rosin presses are complicated tools, therefore there are a lot of factors which must be taken into account. Below we will list the main ones, which can make a search for this tool much easier.
Temperature is essential for making high-quality rosin. Here we can see two alternatives. The first temperature range is between 150 and 220 degrees Fahrenheit. In this case scenario, you will get the better flavor but less yield. Now we have a higher temperature between 220 and 250 degrees Fahrenheit. Now, you can expect more yield but less flavor. Ideally, you would use temperatures above 300 degrees Fahrenheit
Pressure is the second most important factor when it comes to choosing the right rosin press. Here you should target for something starting from 500PSI. Of course, the more is better and most presses can provide pressure up to 1300PSI, which is generally enough for most applications.
A 10-ton press = 20,000 lbs. If you have a 3"x5" plate = 15 square inch.
Hence, 20,000/15 = 1,333 PSI
Note: These numbers serve as a guide only. Results will always vary depending on temperature and material as well the press you choose.
There are several types of these presses. Determining what you actually need will give you an answer to the question which press you actually need. Now we will explain the most common types.
These presses are based on standard hydraulic presses but heaters are added. You will need a lot of adjustments and a hydraulic press of 10-20 tons.
Here we have the most popular type. They are great for home-based applications and they are the smallest of them all. They are obviously called manual because you will use your own force to operate them.
These presses may provide up to 30 tons of pressure, but they offer the heating option as well. When it comes to practicality, they are small and compact as well, almost the same as manual models.
These presses use air rather than oil and they are very sophisticated. Despite the fact they are similar to hydraulic models, they can be adjusted during the process itself. All you have to do is to press a button.
When it comes to electric models, they require power outlets and that’s it. Yes, most of them are 1-2 ton presses, but there are 10-ton pressure models out there. On average, you should look for 7000 pounds pressure press.
And now we have the most interesting press of them all. They are basically hydraulic presses, but they can be powered by air, electricity or a hand pump.
Make sure to take into consideration all of the factors we have mentioned here in order to get the best rosin press out there. Getting the best results isn’t very complicated, after all.
Well, by now you must be aware of the many companies that have flooded the market with all sorts of Rosin Press. However, the above factors should give you a glimpse of what you need. To make your search more accurate and ensure you to get value for every dollar that you will use, consider the following features of a great Rosin Press:
As mentioned earlier, the temperature is one of the crucial factors to consider if you want quality rosin. It can basically make or break the entire extraction process. If you decide to go too cool, you will end up having very little yields. On the flip side, when the temperatures are too high it will burn the oil. These issues can be easily solved by having a digitized temperature control on your Rosin Press machine.
When it comes to rosin extraction, timing is another essential that cannot be ignored. The best Rosin Press should at least have two decimals in the running timer. When the temperature increases the timer should regulate itself automatically.
Many people tend to think that having a machine that has large plates will lead to high production. The fact is, it will lead to having burned rosin which will definitely reduce the quality of your rosin. The best Rosin Press will always have narrow and long heat plates which makes the movement of the rosin faster and loaded as it moves to the edges thus having great quality.
Press capacity will sometimes determine the amount of oil that will be extracted making it an important feature to look out for. The best press capacity for a good Rosin Press is 20g and above. An increase in press capacity automatically translates to increased pressure. An automated Rosin Press machine will do automatically.
For commercial uses, it is advisable to use a hydraulic machine which can easily push more than 60,000lbs or electrical pressure machines which can push around 6,000 to 7,000 lbs. Pneumatic cylinders sometimes can be hard to control, so try to avoid them.
The factors that you need to consider that we listed above will help you not to buy a cheap Rosin Press. By buying a cheap machine, you will be sure to have multiple breakdowns and leakages. Don’t just be blinded by the prices, go for the quality. A commercial hydraulic Rosin Press will serve you the best and is easy to maintain.
This particular model is incredibly effective, as it offers you two heated plates that are 3” x 8” respectively. You'll be able to make use of touchscreen temperature controls and a press timer, as well as both Fahrenheit and Celsius scaling options.
There is a Driptek function available here, although the standing mount is sold separately. You can easily remove the hydraulic bottle jack for simple maintenance as well! It's very easy to operate and features an ergonomic handle design; they also implemented free accessories with every purchase!
Pros: Easy to use, affordable and built to last
Cons: A bit on the smaller side, touch screen control can be wonky at times
When you want to ensure that your press is built for longevity, this option would fit the bill perfectly. This product is said to offer up more than 6,000 hours of service time! Not only that, but the anodized food-grade press surface allows for an accurately and evenly dispersed temperature during your presses.
The heat insulation that you obtain with this particular option is stellar, as the dual insulation layers work to keep your press as hot as possible. You can repair the press with relative ease when it comes down to it, and you'll always have “ideal pressure” for pressing your materials (maximum pressure force of 12,000 lbs).
Pros: Very durable, the jack is replaceable, accurate temperatures consistently, high-quality materials
Cons: It's incredibly expensive compared to some of the other options available!
While some people wouldn't even bother with a hand crank press, there are plenty of reasons as to why you would go down that route. These presses are very easy to clean when it comes to rosin, and you can customize the machine to produce the exact temperature and pressure that you'd like. You set the tone with the hand crank, but the fact that it's constructed out of high-quality materials is just another positive trait to consider.
If you wanted to have as much control as possible over the pressing process, using a hand crank would be your best bet. It takes a bit more “manpower”, but you're more than likely going to be pleased with the results that you receive.
Pros: Affordable when compared to some of the higher-end presses, easy to clean and use, great value all around!
Cons: Tends to move around when the press isn't bolted down and it can be tough to use for those who aren't “strong”
While there is no pump included with this particular model, it's still ideal for those who are looking to press smaller batches of flower. This model features 10 tons of available pressure, as well as “Drip Technology” to ensure that your yield is as high as possible.
They've implemented bamboo insulation layers within to ensure that the press heats up quickly, as well as avoiding overheating in specific areas. The 3” x 5” pressing area is more than enough for personal use, which is ideal for this small portable press.
Pros: Great for personal use, heats up quickly and retains the heat well, drip technology will let nothing go to waste!
Cons: A bit too small for some people, does not come with a pump included.
Dulytek is a known brand within the heat pressing industry, and here they offer up a personal heat press that's perfect for small batches. It's priced affordably as it's about $200 and is one of the lightest presses that you're going to come across (it weighs in at under 10 lbs!). There is no extra equipment needed to get started, all you need is the product you plan on pressing and you're good to go.
It's very portable, although it isn't marketed as a “portable heat press”. The packaging is discreet and they've used high-quality materials, as it's built for longevity. Not only that, but it's somewhat affordable as well! With 2” x 3” of heating pads to work with, you're bound to get more out of your presses.
Pros: Lightweight and discreet, evenly heated and built with high-quality materials (also affordable!)
Cons: On the smaller side, difficult to find in stock at times
The Dulytek DM1005 Manual Heat Press is an apt product for individual use as well as small businesses. It is mainly used for solvent-less plant oil extractions. It features 3” x 5” dual heating plates and has simple-to-use touch-screen temperature controls and press timer. This feature lets you save and set press parameters so that multiple batch extractions can be performed quickly. The dual heat plates are made up of aluminum, which ensures that the heat is distributed evenly and you get the best yield.
Also, the device is extremely easy to operate, and first-time users will be able to use it effortlessly. You will not require any other equipment to use the press. It is a high yielding device that has adjustable pressure knob that lets you apply force up to 1000lbs. Thus, it reduces manual workload. The heat press provides innovative lever mechanism to lock maximum pressure. There are rubber stoppers on the bottom of the equipment so that it stays in place at the time of use. Personally, I found the Dulytek DM1005 Manual Heat Press to be a perfect product for making rosin at home. The compact size of the device makes it easy for me to keep in my kitchen.
There are plenty of accessories that you could purchase to make the pressing process easier, as well as just more effective as a whole. Some of the accessories that you would want to consider would be:
Screen Bags – Allows you to press the rosin without worrying about tainting it with flower
Adapters – Gives you the ability to work with any press at any given time
Filters – Much like screen bags, filters allow you to go through the pressing process without contamination
Pre-Press Molds – You'll be able to mold your rosin into specific shapes with pre-press molds
Thermometers – The temperature of your press is important, and you can monitor it at all times with a proper thermometer!
Screen bags can come in many different sizes, much like pre-press molds – the thermometers can be used to ensure that your device is pressing at the right temperature (if there isn't a temperature reading on the press, of course). Buying the perfect press isn't always as simple as one would think it is, but this list should allow you to at least start strolling down the right path.
You're only going to be as good as your press allows, so don't cut any corners! Be sure to research as much as you can before making a purchase, as it's going to have an impact on your overall experience. At the end of the day, who wants to be wasting their product by pressing it with the wrong model?
(Note: These can be out of stock or not available anymore. So it is advisable to get one from the 2020 list. However, it is a good practice to have a look and compare what else is or was in the market)
The best rosin press is here on the list. All you need to do is to choose the model which suits you the most and the one which can meet all your demands. We tested only the best models, with the best features and with the best quality. Regardless of the unit you choose, you won’t make a mistake. And if you are also interested in reloading press feel free to read our article.
Last update on 2021-10-17 / Affiliate links / Images from Amazon Product Advertising API